| Product Image |
Model+ |
Item Name |
Price |
 |
BV04 |
1/2" NPT male to male SS CrossNipple 1” long (5/8" ID) |
$4.99
... more info
|
 |
BV04L |
1/2" NPS (Not NPT) male to male SS Close Nipple 1.5 ” long (5/8" ID) SS304 |
$0.99
... more info
|
 |
BV04LC |
Close Nipple (SS 304) 1-3/4"ID x 1-3/4" long. This is an odd fitting for homebrewing... it was actually a mistake. Were... |
$0.95
... more info
|
|
BV04LL |
1/2" NPS male to male SS Close Nipple 3 ” long (5/8" ID) SS304 |
$6.99
... more info
|
 |
BV0Q2 |
1/2" Barb QuickConnector Stainless Swivel Fitting have silicone grips that remain cool when hot liquids are flowing through the connector. Fits... |
$12.59
... more info
|
 |
BV0Q2E |
90 Degree 1/2" Barb QuickConnector Stainless Swivel Fitting have silicone grips that remain cool when hot liquids are flowing through the... |
$15.99
... more info
|
|
BV0Q3 |
3/8" Barb QuickConnector Stainless Swivel Fitting have silicone grips that remain cool when hot liquids are flowing through the connector. Fits... |
$12.59
... more info
|
 |
BV0Q3E |
90 degree 3/8" Barb QuickConnector Stainless Swivel Fitting have silicone grips that remain cool when hot liquids are flowing through the... |
$15.99
... more info
|
 |
P113 |
The threaded fitting that goes through the bulkhead grommet is a Male 1/4” MFL. So it can also be threaded into any Female... |
$15.99
... more info
|
 |
P113B |
This Product has a 1/4" barbed stem for your choice of Dip Tube The threaded fitting that goes through the bulkhead grommet is a... |
$16.99
... more info
|
 |
PM01 |
The BrewMometer Hole Plug is a single hole plug for the weld-less BrewMometers so you can drill additional hole(s) in the pot to move the thermo... |
$9.99
... more info
|
 |
PM01O |
Blichmann Engineering - O-Ring Seal Kit for Boiler Makers |
$6.75
... more info
|
 |
T004L |
Teflon Plumbers Tape ½ inch x 23 1/3 feet. -Quick, clean airtight seals. -Tensile Strength 21 pounds. |
$1.99
... more info
|
 |
TC00 |
Stainless Steel Tri-Clover Clamps used in the Brewing and Food & Beverage industries. They are now widely used by home brewers due to their safe... |
$11.99
... more info
|
 |
TC01 |
Tri-Clamp by Male NPT in Stainless Steel (304) is used commonly in home brew applications to convert a TC (Tri Clamp) connection to ½”... |
$12.99
... more info
|
 |
TC02 |
Often used to convert a Male ½” NPT thread into a 1.5" Tri-Clover Fitting, like putting a Tri-Clamp end onto a pump. |
$12.99
... more info
|
 |
TC07 |
· Tri-Clamp Hose Barb for Brewing.... |
$11.99
... more info
|
|
TC08 |
· Tri-Clamp Hose Barb for Brewing.... |
$11.99
... more info
|
 |
TC09 |
Works with 1.5" Tri-clamp. More Information Specs Material: 304 Stainless Steel Flange Outside Diameter: 1.984" Thread... |
$15.99
... more info
|
