Quickly change your existing draft system for use with Homebrew or soda C-Kegs. Easily switch the connectors and taps depending on what you are dispensing in just seconds.
To install: Cut your CO
2 line about three inches before the tap. Insert the barbed male quick disconnect into the end of three inch line coming from the tap and fasten with a clamp. Then insert the female quick disconnect into the end of the line coming from the regulator and fasten with a clamp.
Kit Includes:
| 1ea 1/4'' Female in-line Quick Disconnect | 1ea Picnic Faucet | 2ea 1/4'' Male in-line Quick Disconnect |
| 3ft 1/4'' Product Hose | 2ea Stepless Clamps | Liquid Disconnect |
| 3" CO2 line | 2ea Screw Clamps | Gas Disconnect |
