Blichmann The RipTide pump (1/2 NPT ports) 120V or 230V

Starting at: $248.49

RipTide™ Brewing Pump

Available in 120V or 230V, see options below.

The RipTide™ pump - built from the ground up as a homebrewing pump!   Includes valve and base - a $50 retail value!

Gone are the days of  making do with a general purpose pump such as the March 815 and all the variant imported copies.  These pumps are cumbersome to disassemble, difficult to prime to get the wort moving, require the addition of a valve, a switch, and a proper base to hold the pump upright.  They also use noisy open motors that must be shielded from liquids.  All undesireable attributes for a homebrewing pump!  The team of homebrewers at Blichmann Engineering and our friends at March Manufacturing have created the RipTide™ to solve all of these problems!  Avaliabe in 120V or 230V see options below.
  
 

 

 

Features

The all new RipTide™ is the very first pump designed specifically for homebrewing!  We've solved the problems that have plagued homebrewers for years!
  • High performance curved blade impeller and strong rare earth magnets deliver 7 GPM and up to 21ft of pressure head!

  • Tri-clamp head connection fully disassembles in seconds for easy cleaning

  • 1/2" NPT inlet and outlet connections

  • Totally enclosed motor is splash proof and super quiet (50 dB)

  • Integral linear flow valve for superior flow control - don't spend more money for a separate valve and fittings.  A separate valve and fittings can easily cost you an additional $25-35!

  • Integral air vent valve and partially enclosed impeller design allows you to prime the pump in seconds - no more frustrating air locked pumps!

  • Stainless steel head rotates 360 degrees to fit in virtually any installation

  • Large stable base with protective rubber feet keeps the pump from tipping - a $25 retail value included!

  • Convenient power switch on the base

  • Includes a 10ft long cord with plug (120V)

  • Base acts as a cord wrap for convenient storage

  • Assembled in USA from USA and imported components

 

Please Choose:

Accesories (Stainless)








I would like one Stainless Steel Nippple 1/2" FPT x 1/2 Barb

Pump Voltage Choice





Cam Locks (quick and easy way to connect liquid volume hose.)








I would like two 1/2" Stainless Adapter Male Camlock QD

Tri-Clamp Fittings














10ea 1.5" Silicone Gasket (tri Clover Compatible)

Fittings and Hardware










I would like one Brass 3/8" Barb X 1/2" FPT


I would like one Stainless Steel 1/2" X 1/2" FPT

Accesories (Stainless)








I would like two Stainless Steel Nippple 1/2" MPT x 1/2" Barb

You may need?






Keg Lube Food grade lubricant for rubber and plastic parts.


Add to Cart:

  • Model: 1080


Copyright © 2024 HeartsHomeBrew.com, Inc. Powered by SBS.